 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20620 rev. C 08/01 30EPH06 Hyperfast Rectifier Features * * * * * Hyperfastfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175C Operating Junction Temperature Single Diode Center Tap trr = 28ns typ. IF(AV) = 30Amp VR = 600V Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM TJ, TSTG Peak Repetitive Reverse Voltage Average Rectifier Forward Current Non Repetitive Peak Surge Current @ TC = 116C @ TJ = 25C Max 600 30 300 - 65 to 175 Units V A C Operating Junction and Storage Temperatures Case Styles 30EPH06 BASE COMMON CATHODE 2 1 CATHODE 3 ANODE TO247 www.irf.com 1 30EPH06 Bulletin PD-20620 rev. C 08/01 Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 600 2.0 2.6 V V V A A pF nH IR = 100A IF = 30A, TJ = 25C IF = 30A, TJ = 150C VR = VR Rated TJ = 150C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body 1.34 1.75 0.3 60 33 3.5 50 500 - IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TJ = 25C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 28 31 77 35 nC A ns IF = 1.0A, diF/dt = 50A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C IF = 30A VR = 200V diF /dt = 200A/s IRRM Peak Recovery Current - 3.5 7.7 65 345 Qrr Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC RthJA ! RthCS" Wt Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Per Leg Per Leg Min - 65 - 65 - Typ 0.5 0.4 6.0 0.22 - Max 175 175 0.9 70 12 10 Units C C/W g (oz) Kg-cm lbf.in Mounting Torque 6.0 5.0 ! Typical Socket Mount "#Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 30EPH06 Bulletin PD-20620 rev. C 08/01 1000 Reverse Current - I R (A) 1000 100 10 1 0.1 Tj = 175C 150C 125C 100C 25C Instantaneous Forward Current - I F (A) 0.01 0.001 100 0.0001 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 1000 10 T = 175C J T = 150C J T = 25C J Junction Capacitance - C T (pF) T J = 25C 100 1 0 0.5 1 1.5 2 2.5 3 3.5 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics 10 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 1 Thermal Impedance Z thJC (C/W) 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM t1 0.01 Single Pulse (Thermal Resistance) t2 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.001 0.00001 0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 1 10 www.irf.com 3 30EPH06 Bulletin PD-20620 rev. C 08/01 180 Allowable Case Temperature (C) 90 Average Power Loss ( Watts ) 80 70 60 50 40 30 20 10 0 0 RMS Limit 160 DC 140 120 Square wave (D = 0.50) Rated Vr applied DC D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 100 see note (3) 80 0 5 10 15 20 25 30 35 40 45 Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current 5 10 15 20 25 30 35 40 45 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics 90 80 70 60 50 40 30 20 Qrr ( nC ) trr ( ns ) IF = 30 A IF = 15 A 1200 V R = 200V T J = 125C T J = 25C 1000 IF = 30 A IF = 15 A 800 600 400 200 10 0 100 V R = 200V T J = 125C T J = 25C 1000 di F /dt (A/s ) 0 100 1000 Fig. 7 - Typical Reverse Recovery vs. di F /dt di F /dt (A/s ) Fig. 8 - Typical Stored Charge vs. di F /dt (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 4 www.irf.com 30EPH06 Bulletin PD-20620 rev. C 08/01 Reverse Recovery Circuit VR = 200V 0.01 L = 70H D.U.T. diF /dt dif/dt ADJUST D G IRFP250 S Fig. 9- Reverse Recovery Parameter Test Circuit 3 IF 0 trr ta tb 4 2 Q rr I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 30EPH06 Bulletin PD-20620 rev. C 08/01 Outline Table 15.90 (0.626) 15.30 (0.602) 3.65 (0.144) DIA. 3.55 (0.139) 5.30 (0.209) 4.70 (0.185) 2.5 (0.098) 1.5 (0.059) 5.70 (0.225) 5.30 (0.208) 20.30 (0.800) 19.70 (0.775) 1 3 5.50 (0.217) 4.50 (0.177) (2 PLCS.) 1 3 ANODE BASE COMMON CATHODE 2 14.80 (0.583) 14.20 (0.559) 4.30 (0.170) 3.70 (0.145) 2.20 (0.087) MAX. 0.80 (0.032) 0.40 (0.213) 2.40 (0.095) MAX. CATHODE 1.40 (0.056) 1.00 (0.039) 10.94 (0.430) 10.86 (0.427) Conforms to JEDEC Outline TO-247 Dimensions in millimeters and (inches) Ordering Information Table Device Code 30 1 E 2 P 3 H 4 06 5 1 2 3 4 5 - Current Rating (30 = 30A) E P H = Single Diode = TO-247 = HyperFast Recovery Voltage Rating (06 = 600V) 6 www.irf.com 30EPH06 Bulletin PD-20620 rev. C 08/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information 08/01 www.irf.com 7 |
Price & Availability of 30EPH06
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |